CS Team  +82-70-7547-7128

CVD v2.x Video Guide - Flash Loader

2020-10-15 22:35
The video guide shows how to write data into a Flash Memory (NOR/NAND) on your target system
by using CodeViser and CVD.
CodeViser is able to control the Flash Memory by downloading a Flash Memory Driver named FlashLoader
to the RAM area of your target system.
So the RAM on your target system should be initialized for using the FlashLoader.

Main Sections.

1) The configuration related to Flash Memory.
2) The way to write User Flash Loader.
3) The way to use User Flash Loader.

If you have addtional questions related to making FlashLoader or using FlashLoader,
please contact to JnDTech Technical Support Team.

The video guides are based on CVD v2.0 20100205.

Before watching the video guides

Please connect CodeViser to your PC and CodeViser to your target system. Refer to CVD User Manual about it.
Configurations of your taget for the connection could vary with its feature.

This video is only for who has purchased CodeViser.

Other company and product names mentioned herein
are the trademarks or registered trademarks of their respective owners.

Copyrightⓒ 2010 by JnDTech All rights reserved.
No part of this video may be reproduced in any forms or by any means,
without permission in writing from the publisher.

Copyright ⓒ J&DTECH All rights reserved.