CS Team  +82-70-7547-7128

AESOP S5PC100 Flash Loader / Script / Resources

2020-10-15 22:36
These files are FlashLoader, Script, and Resources for S5PC100 processor from AESOP.

The attached file is composed following as below.

- aESOP_C100_NAND.csf
The script file is for fusing U-Boot to nand flash of aESOP S5PC100 board.
Initialization of memory is included.

- aESOP_C100_NOR.csf
The script file is for fusing to NOR flash of aESOP S5PC100 board.
Initialization of memory is included.

- aESOP_C100_Init.csf
The script file is for setting CVD environment configurations to debug aESOP S5PC100 board.
Make sure the board runs with U-boot, and memory initialization is not included.

The device file is for memory initialization of the board without the script file.

Please copy it to "CVD installation path\device".

- SMDKC100_4GB
The flash loader is for fusing to Nand flash of aESOP S5P100 board.

The execution images / source codes are for debugging Application, Module, Library.
These files are added to Root FileSystem for debugging.


Execute the script what is included in the attached file by using [Program]-[Open Script File].
And Select the binary what you are going to download by using [Program]-[Download Binary / Hex File].

** The format of CVD script has been changed from CVD 2.0 version.

Copyrightⓒ 2010 by JnDTech All rights reserved.
No part of this material may be reproduced in any forms or by any means, without permission in writing from the publisher.

Copyright ⓒ J&DTECH All rights reserved.